Tesi FILO 16MM LED Momentary Push Button Guitar Kill Switch Black/Green

Description

THIS LISTING IS FOR THE 16MM FILO KILL SWITCH IN BLACK WITH GREEN LED.
To see what other colors are available, please visit my other listings.
Specs:
Type:
Momentary
Push Button Switch
Operation Type:
Normally Open
(yes, this is correct for instrument kill switch operation. Included instructions show you how to wire it properly!)
Housing Material:
Plated Brass
Mounting hole Size:
16mm
Mounting Panel Thickness:
1mm-6mm
Operation Pressure: about
5n
Operation Stroke:
2.5mm
LED Rated Voltage:
6V
(includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring)
*note:  This will also function with an 18v active electronics system. Please make a note on your order to make sure you get the right resistors.
LED Life: About
40,000 hours
LED Power Draw:
15mA
Contact Resistance:
50 mOhm
Mechanical Life:
500,000 cycles
Switch Rating:
2A/36VDC
What does all this mean?
You're getting a tough switch that will last a long time in your instrument and look good doing it!
The switch is easy to install. If you have the slightest bit of skill with a soldering iron you can do it yourself. If you do not have that skill, you should have a guitar repair person do it.
This package comes with everything:
(1) Tesi FILO 16mm Momentary Guitar Kill Switch
(1) Tesi Quick-Connect wiring Bundle that includes:
(1) Black/Black ground wire
(1) Black/White hot wire
(1) White/Red Power wire with resistor
(1) 9V Battery Harness with resistor
(1) On/Off Rocker Switch
(1) Set of easy-to-follow wiring instructions
(2) Spare 270 Ohm resistors for custom wiring jobs
When used with active pickups and/or a stereo output jack (not included) the Tesi FILO does not require the included on/off rocker switch.
Each Tesi Guitar Kill Switch is guaranteed against defect for one year from the date of sale.  Contact us for more details.
The Tesi Switch Difference:
We test every switch before packaging it.  As a result, the failure rate is less than 1%.  We package the 12MM and larger switches in a custom cut foam block and place in a small box for protection. The box also includes a couple of Tesi Switch guitar picks, as well as all the wiring necessary to install in an active or passive system, and we are always happy to help with installation questions.
If something does go wrong, our switches have a
1-Year Guarantee
against defect or failure.
PLEASE NOTE:
Do not
try to connect the switch directly to a battery. The LED is a 6V bulb and requires a resistor with a minimum value of 270 Ohms to work with a 9V battery.  Using a 9V battery without the resistor voids the warranty on the switch.