4 CTS 525K 5% tolerance Custom Audio Taper Pots Long Shaft 3/4" fit Gibson LP

Description

These are the highest quality Potentiometers that the CTS Corporation manufacture.
WD® Music Products developed these high-quality potentiometers with CTS® to offer you exceptional performance in electronics for your Les Paul and other carved-top instrument requiring the longer 3/4" bushing/shaft length. These are
NOT
the same CTS pots that other companies stock and sell. These are developed using 5% +/- tolerances and a value at 5% over the standard 500K rating (525K). This ensures you not only optimum performance but guarantees your potentiometers will always be at least the value stated unlike many others using 20% tolerances where you can be over spec but in most cases way under the specifications you need to ensure good tone from your pickups. They added brass components and a high quality long life wiper versus what comes standard on most run of the mill pots to ensure long life, quality and consistent performance.
You are purchasing a set of 4 of the best CTS Pots on the market (They don't get any better than this). Each pot comes with 2 washers and 2 nuts.
Before I ship, I measure your pots and mark them with a V or T (Volume or Tone)
Important Specs and Dimensions:
Tolerance = +/- 5%
Value = 525K Ohms
Can Size = 15/16 in. radius X 3/4 in. height
Bushing Threads = 3/8-32
Bushing Height = 3/4 in.
Shaft Type - split
Shaft Diameter = .238 in (6.0mm)
Spline Count = 24 (NOT metric)
Hole size requirement = 3/8 in.